EasyManua.ls Logo

Bajaj CT 110 - Vehicle Stopping and Parking

Bajaj CT 110
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Stopping the Vehicle :
Close the throttle completely.
Shift the transmission into neutral.
Bring the vehicle to complete stop.
Turn the ignition switch off.
Parking the Vehicle :
Support the motorcycle on a firm level
surface with the center or side stand.
Lock the steering.
Running IN
Proper running-in is important for the better
life & trouble free performance of the vehicle.
During first 2000 kms running-in period do
not exceed following speed limits.
Always keep the speed below the limits
mentioned in the table.
Do not race the engine excessively.
Do not start moving or race the engine
immediately after starting. Run the engine
for a minute at idle speed to give the oil a
chance to workup into the engine.
Applicable for CT100KS, CT100ES & CT 110
models.
How to Ride Your Bike
15
When stopping, always apply both brakes at
the same time. De-clutch as necessary to
avoid engine stalling.
Never lock the brakes, or it will cause the
vehicle to skid. When cornering, use brakes
judiciously & do not de-clutch. Reduce your
speed before you get into the corner. For
emergency braking, disregard downshifting,
and concentrate on applying brakes as hard
as possible without skidding.
Kms 1st 2nd 3rd 4th
0 - 1000 10 20 30 40
1000 - 2000 15 30 40 45