Bakcou Flatlander Assembly

7.
For further assistance, go online for helpful instructional videos at bakcou.com
READ BEFORE USE
22. Make sure to check all nuts and bolts
to ensure they have not loosened
during shipping.
23. Battery typically has a partial charge straight
from the box. Riding the bike straight out
of the box will not impact battery life or
compromise the battery in any way.
24. Battery can be charged while on the bike, or it
can be removed and charged o of the bike.
25. Keys are only used to remove battery from
bike. Simply insert key into lock and turn,
while pulling out and up on battery handle
to remove battery.
26. To reinsert battery, key is not needed;
simply place bottom of battery into lower
slot and rmly push top of batter into upper
slot. (Note: make sure battery is locked
rmly into place prior to riding as a loose
battery may cause inadvertent loss of
power, or battery may fall out of chamber
and become damaged. After reinserting,
check battery attachment by pulling out
and up on handle to ensure it is
securely fastened.)
27. Assembly is now complete, however,
minor adjustments are often necessary
to precisely t eBike to rider. These
adjustments can include rotating locking
handle grips, moving/rotating brake levers,
throttle, and shifters. These adjustments
are easily performed. However, feel free
to contact us via email or phone with
any questions.
28. Note: A Suspension Adjustment video and
Display Use video can each be viewed
under “Support” on the Bakcou website.
Note: Located at the bottom of some
right front forks is a blue knob called a
shock dampener. This knob is used to
control the rebound speed of the fork.
Knob can be twisted clockwise to close or
counter-clockwise to open, thus allowing
more or less airow to increase/decrease
rebound speed. Make certain to tighten
the screw inside the dampener knob
and we recommend using Loctite on the
threads to keep screw in place. After
tightening screw, tighten (turn clockwise)
the dampener knob and then back o 1 ½
turns. After getting used to your Flatlander’s
suspension, adjust accordingly.
29. It may be necessary to adjust your
derailleur prior to rst use. Refer to our
Troubleshooting Shifting Problems video on
the Bakcou website for support adjusting
your derailleur, or visit your local bike shop
for assistance.
30. Two “green” rolls of puncture proof tire
liners may be located in the bike box or in
the tool kit box. The liner goes in between
the tube and the tire. If the liners are
not in the box or tool kit box, then they
were installed at the factory. Some
riders prefer to use these liners as well as
a tube sealant such as Bakcou Flat Out
for added protection from punctures. The
liner will add some weight to the tire and
does aect the exibility of the rubber, thus
slightly changing how the tire rolls across
some terrain. We strongly encourage using
the puncture proof liner when riding in
areas with heavy “goat heads” or other
tube puncturing thorns. (Bakcou YouTube
instructional video available online.)
31. Regular and routine maintenance of your
eBike is not only recommended, but highly
essential to ensure proper function, safety,
and longevity of your eBike. See Owner’s
Manual for further instruction.
32. Always wear a helmet and other
protective gear while riding.
33. Always know and observe trac and trail
laws and regulations in your area.

Bakcou Flatlander Specifications

General

Brand	Bakcou
Model	Flatlander
Category	Bicycle
Language	English