INSTALL BATTERY
19. Key is not needed to install battery; simply place the bottom
of the battery into lower slot and rmly push top of battery into
upper slot. Make sure battery is locked rmly into place prior to
riding as a loose battery may cause inadvertent loss of power,
or the battery may fall out of chamber and become damaged.
After reinserting, check the battery attachment by pulling out
and up on the handle to ensure it is securely fastened.
INFLATE TIRES
20. Using a Schrader valve bike pump, inate the tires to around 20
psi. Max psi is 30.
SET SHOCK PUMP
21.Shocks are dependent upon rider weight and gear and will vary
from rider to rider. Use a fork/shock specic pump to set the
shock PSI. If you need assistance, call the Bakcou Customer
Support Team or visit your local bike shop. DO NOT use an air
compressor or tire pump.
120psi (80-120lbs), 130psi (121-150lbs), 140psi (151-170lbs),
150psi (170-200lbs), 160psi (201-220lbs), 170psi (221-250lbs)
220psi Max
BAKCOU.COM
ELEVATE YOUR LIFE
To Next Page
Loading...
Need help?
General
