20906 Higgins Court, * Torrance, CA 90501 * Tel. (310) 533-3939
GLAZE SPRAYER JELLY QUICK OPERATION
Working with bag in the box ready-made glaze.
1. Remove the cap from the box of glaze
2. Connect the suction hose to the box of glaze (See page 6).
3. Place the box of glaze on top of the machine
4. connect the Jelly Quick to 110 volt outlet
5. turn on the Jelly Quick (on/off switch)
6. When red light turns off, the machine is ready
7. Remove the spray gun from the holder
8. Hold the spray gun approximately 4” directly above the product
9. After spraying, return the spray gun to the holder
SHUTTING DOWN THE GLAZE SPRAYER
- Switch off the machine when the work is completed.
- Disconnect the machine from the electricity supply.
- Spray the gun empty until the pressure has subsided.
Technical specifications:
To Next Page
Loading...