Balanced Body Allegro 2 Reformer User Manual

Instructions for Allegro® 2 Reformer
Options and Accessories
INCLUDES INSTRUCTIONS FOR ALLEGRO 2:
» Foot Strap Page 1
» Extended Legs Page 2
» Wheel Kit Page 3
» Wall Security Strap Page 4
» 4th Side for Tower Push-thru Bar Page 4
» Tower Mat Conversion Page 4
I. INSTALLING THE ALLEGRO 2 FOOT STRAP
Feed the loops of the footstrap between the frame and standing
platform, through the footman’s loops, and then around the hook
plates on the underside of the standing platform as shown in
Figure A.
For a long footstrap, place the
loops around the outer hooks.
For a short footstrap, place the
loops around the inner hooks.
For a medium length footstrap,
place one loop around the
outer hook and the other loop
around the inner hook. See
Figure A.
IMPORTANT SAFETY TIP:
The foot strap must be
checked for proper installation
before each use. An improperly
installed foot strap can lead to
serious injury.
Figure A: Shown from under Standing Platform.
Outer hook
Inner hook
Footman’s
loop
Figure B: Footstrap shown from top of
standing platform.
Footstrap
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | info@pilates.com
400-230 | 05.16.17

Balanced Body Allegro 2 Reformer Specifications

General

Brand	Balanced Body
Model	Allegro 2 Reformer
Category	Fitness Equipment
Language	English

Summary

Installing the Allegro 2 Foot Strap

Installing the Extended Legs and Posts

Install Legs

Steps to install the extended legs, raising the Reformer height by 6 inches.

Install Post for Loops

Attaching the U-post for storing loops on the carriage posts.

Installing the Wheel Kits

Installing Wheels

Procedure for installing wheel brackets and feet for mobility.

Standing the Allegro 2 with the Wheel Kits

Guidance on safely standing the Reformer on its foot-end using wheels.

Wall Security Strap

Fourth-Side for Tower Push-Thru Bar (PTB)

Mat Conversion