Why is there no power supply to my Balboa BP6013G1 Hot Tub?
If your Balboa Hot Tub isn't receiving power, it could be due to a problem with the power circuit. You should check the circuit. Alternatively, the protective switch may be cut off. In this case, check for and remove any short circuits, then reconnect the protective switch.
What to do if there is no reaction for panel key on Balboa BP6013G1?
If the panel keys on your Balboa Hot Tub aren't responding, the panel might be locked; try unlocking it. If that doesn't work, the panel might be broken and need to be changed.
Why is the constant temperature effect unavailable on my Balboa Hot Tub?
If the constant temperature feature isn't working on your Balboa Hot Tub, the thermostat might be damaged. Consider repairing or replacing it. Also, check the power supply to ensure it's available. Finally, a jammed filter can cause this issue, so clean or replace the filter paper core.
What to do if the nozzle doesn’t spray water in my Balboa BP6013G1 Hot Tub?
If the nozzle on your Balboa Hot Tub isn't spraying water, it could be due to several reasons. First, check the power supply to the water pump and connect the power wire if necessary. Second, ensure the massage water pump is starting. If the pump is damaged, you'll need to replace it. Lastly, air in the pipe can also prevent spraying; purify the pipe by loosening the joint part.
Why does my Balboa BP6013G1 Hot Tub have a poor filtering effect?
If your Balboa Hot Tub has a poor filtering effect, it could be because the filter water pump isn't started; make sure to start it. Another reason might be that the filter isn't clean, so try cleaning it. If the filter water pump is damaged, consider replacing it.
What to do if the underwater lamp doesn’t light on in my Balboa BP6013G1?
If the underwater lamp in your Balboa Hot Tub isn't lighting up, the bulb might be damaged, so try replacing it. Alternatively, the fuse could be broken, so replace the fuse.
How to fix scratches on my Balboa BP6013G1 Hot Tub bathtub?
To address scratches on your Balboa Hot Tub bathtub, grind the scratched area with 2000# grinding paper and water, then polish it with toothpaste and a soft fabric.
General| Model | BP6013G1 |
|---|---|
| Category | Hot Tub |
| Heater | 5.5kW |
| Ozone | Yes |
| Pump Quantity | 2 |
| Amperage | 50A |
| Control System | Balboa BP Series |
| Light | Yes |
Crucial safety instructions and precautions for SPA users before operation.
Instructions for Balboa BP6013G1/G2/G3 control systems with TP600/TP400 panels.
Procedure for powering up the spa control system and initial priming mode.
How to use temperature, light, and mode buttons for basic spa functions.
Navigating menus and programming settings like filtration and timers.
Instructions for filling the spa and priming the pumps.
Details on pump, air pump, and circulation pump operational modes.
How to adjust set temperature and select dual temperature ranges.
Understanding Ready, Rest modes and setting the time-of-day.
How to adjust filter cycles and set the light timer.
Setting display units, reminders, and accessing system utilities.
Accessing system info, software ID, model, and configuration settings.
How to test GFCI and access fault log for diagnostics.
Understanding and troubleshooting various error messages.
Overview of maintenance reminders and critical service warnings.
Operation, modes, and diagnostics for GS100/GS500 systems.
Overview of SPA materials, functions, and optional fittings.
Table detailing functions and components for various SPA models.
Instructions for the waterproof Bluetooth amplifier system and its operation.
Normal startup time and safety precautions for thermostat and air pump.
Step-by-step instructions for cleaning and maintaining paper filters.
Diagram and instructions for connecting SPA water pipes, including drain.
Requirements for electric box, switches, and power cords for installation.
Technical specifications for Balboa BP6013 control systems.
Info on TP panels and GS series wiring diagrams.
Instructions for cleaning, repairing scratches, and maintaining the bathtub.
Steps for replacing water pumps, filter cores, and thermostats.
Solutions for panel key, power supply, pump, and filter problems.
Steps for handling defective control systems and warranty contact information.
To Next Page
