Why is there no power supply to my Balboa Hot Tub?
If your Balboa Hot Tub isn't receiving power, it could be due to a problem with the power circuit. You should check the circuit. Alternatively, the protective switch may be cut off. In this case, check for and remove any short circuits, then reconnect the protective switch.
What to do if there is no reaction for panel key on Balboa Hot Tub?
If the panel keys on your Balboa Hot Tub aren't responding, the panel might be locked; try unlocking it. If that doesn't work, the panel might be broken and need to be changed.
Why is the constant temperature effect unavailable on my Balboa Hot Tub?
If the constant temperature feature isn't working on your Balboa Hot Tub, the thermostat might be damaged. Consider repairing or replacing it. Also, check the power supply to ensure it's available. Finally, a jammed filter can cause this issue, so clean or replace the filter paper core.
What to do if the nozzle doesn’t spray water in my Balboa BP6013G2 Hot Tub?
If the nozzle on your Balboa Hot Tub isn't spraying water, it could be due to several reasons. First, check the power supply to the water pump and connect the power wire if necessary. Second, ensure the massage water pump is starting. If the pump is damaged, you'll need to replace it. Lastly, air in the pipe can also prevent spraying; purify the pipe by loosening the joint part.
Why does my Balboa BP6013G2 Hot Tub have a poor filtering effect?
If your Balboa Hot Tub has a poor filtering effect, it could be because the filter water pump isn't started; make sure to start it. Another reason might be that the filter isn't clean, so try cleaning it. If the filter water pump is damaged, consider replacing it.
What to do if the underwater lamp doesn’t light on in my Balboa BP6013G2?
If the underwater lamp in your Balboa Hot Tub isn't lighting up, the bulb might be damaged, so try replacing it. Alternatively, the fuse could be broken, so replace the fuse.
How to fix scratches on my Balboa Hot Tub bathtub?
To address scratches on your Balboa Hot Tub bathtub, grind the scratched area with 2000# grinding paper and water, then polish it with toothpaste and a soft fabric.
Overview of the BP6013G1/G2/G3 Balboa control system for TP600/TP400 panels.
Steps for initial spa startup, including priming, temperature adjustment, and panel navigation.
Navigating menus, programming settings, and understanding modes like Ready/Rest.
Covers filtration cycles, dual temperature ranges, and Ready/Rest modes.
Steps for filling the spa and the crucial priming process for pumps.
How to adjust set temperatures, use press-and-hold, and configure dual temperature ranges.
Accessing system info, diagnostic messages, error codes, GFCI tests, and fault logs.
Details on the BP6013G1/G2/G3 Balboa control system, panels, and power requirements.
Details on GS100/GS500 control systems, including power requirements and system outputs.
General| Model | BP6013G2 |
|---|---|
| Category | Hot Tub |
| System Type | Balboa BP Series |
| Voltage | 240V |
| Pump Connections | 2 |
| Ozone | Yes |
| Control Type | Digital |
| Heater | 3.0 kW |
| Pump 1 | 2-speed |
| Pump 2 | 2-speed |
| Display | LCD |
| Certification | UL |
To Next Page
