Baldor BD Series User Manual

BALDOR AIR COMPRESSOR
33
overload
protection
low voltage
transform the circuit
Exhaust pressure is a little high.
re-adjust pressure control
air end fault
check the air end
main motor bearing wear
check and replace
main motor hot-protector fault
check the motor thermistor
The machine
has abnormal
sound.
main motor bearing wear
check and replace
fan motor bearing wear
check and replace
Air end bearing wear
check and replace
fan collide with the windshield cover
adjust the space
the belt loose
adjust
oil leakage
the air
end
parts
mechanical seal ring aging
replace
the O ring at oil-air place aging
replace
the O ring of exhaust cover aging
replace
Fuel injection flange joint of the
air end do not seal well.
replace the sealing part
oil-air
pipeline
parts
exhaust pipeline and the O ring
of the joint aging
replace
the joint loose
tighten
oil-air
separator
parts
Flange cover do not seal well
with the barrel plane.
replace the asbestos gaskets
O ring of the oil level device
aging
replace
other
parts
The sealing surface of suction
control valve leak oil.
clean, glue and re-install
The sealing surfaces of the
oil filter leak oil.
replace or install after cleaning

Baldor BD Series Specifications

General

Brand	Baldor
Model	BD Series
Category	Air Compressor
Language	English