Do you have a question about the Banana Pi BPI-M2+ and is the answer not in the manual?
SoC | Allwinner H3 |
---|---|
RAM | 1 GB DDR3 |
HDMI | HDMI 1.4 |
Camera | CSI connector |
GPIO | 40-pin header |
GPU | Mali-400 MP2 |
Storage | MicroSD card slot |
Wireless | WiFi 802.11 b/g/n, Bluetooth 4.0 |
Ethernet | 10/100 Mbps |
Audio Output | 3.5mm jack |
Power Supply | 5V/2A |
Details the various hardware interfaces and connectors on the BPI-M2+ board.
Provides a detailed specification sheet for the BPI-M2+ hardware components.
Explains the pinout and definitions for the BPI-M2+ GPIO header.
A guide for first-time users to get started with the Banana Pi, including necessary accessories.
Step-by-step instructions for flashing Android images to the eMMC storage using Windows.