B&B Electronics Elinx EIR510-2MC-T - System Event Log - SMTP Configuration

54
Manual Documentation Number: EIR510-xSFP-T_0708m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
System Event Log - SMTP Configuration
Set up the mail server IP, mail account, account password, and email
account for receiving event alerts.
1. Email Alert: enable or disable the email alert function.
2. SMTP Server IP: set up the mail server IP address.
3. Sender: Enter the email address, e.g. switch102@123.com
, to identify
where the event log came from.
4. Authentication: Mark the check box to enable and configure the email
account and password for authentication.
5. Mail Account: set up the email account, e.g. johnadmin
for the switch.
It must be an existing email account on the mail server.
6. Password: The email account password.
7. Confirm Password: reconfirm the password.
8. Rcpt e-mail Address 1 through 6: Enter up to six email addresses to
receive the event log.
9. Click
Apply
.
SMTP Configuration interface