90
Manual Documentation Number: EIR510-xSFP-T_0708m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
802.1x Misc Configuration interface
MAC Address Table
Static MAC Address
You can add a static MAC address. This address remains in the switch's
address table, regardless of whether the device is physically connected to
the switch. Therefore, the switch does not have to re-learn a device's MAC
address when the disconnected or powered-off device reconnects to the
network. You can add / modify / delete a static MAC address.
Add the Static MAC Address
You can add static MAC addresses in the MAC table.
1. MAC Address: Enter the MAC address of the port that should
permanently forward traffic, regardless of the device network activity..
2. Click
Add
.
3. If you want to delete a MAC address from filtering table, select it click
Delete
To Next Page
Loading...