Need help?Do you have a question about the B&G RAM T3 and is the answer not in the manual?
General| Type | Hydraulic Linear Drive |
|---|---|
| Interface | NMEA 2000 |
| Waterproof Rating | IP67 |
| Voltage | 12V or 24V |
| Stroke Length | 300 mm |
Provides critical safety warnings regarding installation, operation, and potential hazards of the steering system.
Explains the RAM T3 system's components, function, and pre-shipment testing.
Outlines regular maintenance tasks and points to ensure long-term, trouble-free service for the system.
Step-by-step instructions for preparing the reservoir, including opening the breather and filling with oil.
Diagrams and dimensions for correctly mounting the reservoir, including maximum heel angles.
Guidelines and warnings for installing the cylinder, emphasizing rod movement limits and avoiding fouling.
Comprehensive procedure for refilling the hydraulic system and bleeding air to ensure proper function.
Instructions and warnings for commissioning the system, including checking for damage and leaks after installation.
Guides users through common faults like motor not running, erratic movement, or noise, and their potential causes.
To Next Page
