B&G h1000 pilot User Manual

h1000 pilot
introduction
www.bandgservice.co.uk Page 1
overview
Congratulations on your purchase of the h1000 Pilot from B&G. The h1000 Pilot is the latest in
autopilots from B&G and represents B&G’s commitment to providing our customers with the finest
marine navigation systems. The
h1000 Pilot is an easy to use, state-of-the-art computerised
electronic autopilot system designed as a sophisticated navigation aid and provides many useful
features.
Before you begin using your new
h1000 Pilot , please take the time to read this manual to help you
achieve the full potential
from your new system.
features
features
featuresfeatures
features
The h1000 Pilot is a fully functional autopilot which can be used either as a stand-alone system or
integrated into an instrument system.
• Steer to Compass heading, COMP Mode
• Steer to Wind angle, Wind Mode, when connected to the h1000 Wind Interface
• Steer to Waypoint, Nav Mode, either from the
h1000 CND or NMEA via the Universal Interface
• Advanced Control Processor (ACP) with self-learning capabilities
• Red background illumination level in 3 steps from zero to full brightness

B&G h1000 pilot Specifications

General

Brand	B&G
Model	h1000 pilot
Category	Marine Equipment
Language	English

Summary

Introduction

Features

Details the key features of the h1000 Pilot, including steering modes, processor capabilities, and illumination.

Warnings and Precautions

Outlines critical warnings and precautions for using the h1000 Pilot, including cleaning advice and potential interference.

Controls

Navigation and Selection Keys

Mode and Engagement Controls

Course Adjustment Keys

Getting Started

Initial Setup and Power-Up

Advises checking wiring before first use and describes initial power-up display and mode selection.

Engaging and Disengaging the Pilot

Explains how to activate the Pilot using the ON key and disengage it using the OFF key.

Compass Mode Selection

Pilot Mode Selection

Compass Mode Operation

Explains how to engage the Pilot in Compass Mode, steer to a heading, dodge, and memorize new courses.

Wind Mode Operation

Explains steering to AWA/TWA, true wind angle, and automatic tack functions in Wind Mode.

Navigate Mode Operation

Calibration

Calibration Overview

Refers to the Installation Manual for full calibration details and mentions optional security checks.

Entering Secure Mode

Explains the optional security PIN feature for accessing calibration menus and setting a new PIN.

Installation

Precautions

Panel Mounting Procedure

External Connections

Man Overboard (MOB) Procedure

Man Overboard Key Activation

Explains the optional Man Overboard key and its dependence on a paddlewheel sensor for MOB function.

MOB Procedure for Powerboats

Describes automatic recovery for powerboats, executing a Williamson Turn to return to the incident point.

MOB Procedure for Sailboats

Details MOB for sailboats, disabling automatic recovery and requiring manual steering back to the incident point.

MOB Manual Recovery (Pilot OFF)

Guides manual MOB recovery when the Pilot is OFF, involving steering to the incident bearing and distance.

MOB Manual Recovery (Pilot ON)

Details manual MOB recovery with the Pilot ON, using controls to steer back to the incident point.

MOB Automatic Recovery (Power only, Pilot ON)

Explains automatic MOB recovery for powerboats, performing a Williamson Turn, and notes on CND activation.