To Next PageTo Next Page
Need help?Do you have a question about the Bandit INTIMIDATOR 15XP/1390 and is the answer not in the manual?
Required info for ordering chipper replacement parts.
Required info for ordering engine replacement parts.
Required info for ordering clutch replacement parts.
Health warnings and safety advice related to Proposition 65.
Safety feature to increase operator distance from feedwheels.
Safety feature to aid in pushing material safely.
Safety feature preventing hood pin removal while disc is turning.
Safety feature disabling engine if hood pin is misplaced.
Emergency shut-off system for feedwheels.
Safety feature for securing the chipper hood.
Step-by-step guide for safely clearing a plugged chipper.
Section for recording owner's details for warranty.
Section for recording dealer's details for warranty.
Fundamental safety advice for operating the chipper.
Safety precautions for operating the optional hydraulic winch.
Physical dimensions and weight details for chipper models.
Illustrates general locations of safety and informational decals.
Diagram showing the different sides and ends of the chipper.
Identifies key controls and components on the chipper.
Details safe operation procedures for the winch.
Lists daily checks and maintenance tasks before operation.
Checklist for weekly maintenance tasks.
Checklist for monthly maintenance tasks.
Lists specified torque values for various bolts.
Highlights critical maintenance items for optimal performance.
Guidance on safely and effectively sharpening chipper knives.
Details the rope/line shear component and its clearance check.
Step-by-step guide for safely clearing a plugged chipper.
Instructions for checking and adjusting belt tension.
Emphasizes severe hazards associated with hydraulic fluid leaks.
Specifies correct hydraulic fluid types and specifications.
Provides typical hydraulic pressure and flow settings.
Lists common hydraulic problems and their solutions.
Part numbers and diagrams for chipper components.
Catalog of part numbers for infeed hopper components.
Catalog of part numbers for chipper components.
Lists part numbers for chipper knives and hardware.
Details components for manual and hydraulic swivel discharge.
Components for checking hydraulic pressure.
Diagram and parts for the main relief block.
Diagram and parts for the dump valve relief block.
Details components for the optional sliding tongue assembly.
Exploded view and part numbers for the dinamic winch.
Overview of control options for hand-fed Bandit machines.
Describes the main display screen and startup functions.
Explains how to navigate and select operating modes.
Details status of device communication and inputs.
Function check for radio and tether system inputs.
How to adjust parameters in the setup menu.
Operation of manual winch with push button feed assist.
How to view and interpret system faults and diagnostic messages.
How to view and adjust service reminder intervals.
Describes access and parameters for factory settings.
General
