To Next PageTo Next Page
Need help?Do you have a question about the Bandit INTIMIDATOR 19XPC and is the answer not in the manual?
Information required for ordering chipper parts.
Information required for ordering engine parts.
Information required for ordering clutch parts.
Warning about diesel exhaust emissions and health risks.
General safety rules and precautions for operating the chipper.
Specifies required personal protective equipment (PPE) for safe operation.
Provides dimensional and weight specifications for different models.
Safety decal detailing lockout procedures before servicing equipment.
Illustrates general locations of safety and operational decals on the machine.
Explains the function and operation of the autofeed system.
Defines key terms and components related to the autofeed system.
Provides solutions for common autofeed system problems and errors.
Diagram showing the front, back, left, and right sides of the machine.
Identifies and illustrates the location of major controls and components on the machine.
Details the operational procedures for various controls like feedwheel and yoke lift.
Lists essential steps to complete before transporting the machine.
Provides safety instructions and procedures for loading and unloading the machine.
Daily checks and maintenance tasks to ensure proper operation and safety.
Weekly maintenance tasks required for optimal performance and longevity.
Monthly maintenance tasks to maintain the machine's condition.
Quarterly maintenance checks to be performed.
Annual maintenance tasks for the machine.
Chart detailing lubrication points and frequency for machine components.
Information and troubleshooting related to the chipper drum and knives.
Procedures for checking anvil to knife clearance.
Detailed steps for adjusting the anvil.
Procedure to check rope/line shear to knife clearance.
General guidelines for belt tensioning.
Procedures for checking and adjusting main drive belt tension.
Procedures for checking and adjusting pump drive belt tension.
Detailed steps for adjusting belt tension.
Specifications for hydraulic fluid, including types and properties.
Standard pressure settings for hydraulic relief valves and flows.
Overview of the machine's hydraulic system design and principles.
Guide to diagnosing and resolving issues within the hydraulic system.
Diagrams illustrating the machine's electrical wiring configurations.
Illustrated parts list for chipper-specific components.
Illustrated parts list for infeed hopper components.
Information on engine parts required for ordering.
Information on clutch parts required for ordering.
Illustrated parts list for the optional dynamic winch system.
Illustrated parts list for the optional hydraulic bump bar.
Description of the main display screen and its functions.
Instructions for navigating and adjusting setup parameters.
Details on Diesel Particulate Filter (DPF) regeneration and related settings.
Explains fault codes, diagnostic messages, and LED indicators.
Information on setting and managing engine service reminders.
General
