Need help?Do you have a question about the B&K HD6 and is the answer not in the manual?
General| Audio Support | Dolby Digital, DTS, LPCM |
|---|---|
| Power Supply | 5V DC |
| Type | HDMI Switch |
| Inputs | 6 |
| Outputs | 1 x HDMI |
| Control | IR Remote |
| Ports | 1 x HDMI Output |
| Port Type | HDMI |
Crucial safety advice to prevent fire, electric shock, and physical damage.
Explains zone video distribution via RCA and CAT5, and transcoding.
Describes common, dedicated, and buffered video inputs/outputs.
Detailed overview of all connectors and ports on the rear panel of the HD6.
How to link the HD6 to a CT Receiver for seamless operation and control.
Step-by-step guide for performing virtual setup of the HD6 using BKcSuite software.
Setting up groups, assigning code-sets, and naming groups for zone control.
Controlling the HD6 via RS-232 using BKC-DIP commands for operation.
Detailed list of RS-232 commands for power and input selection specific to the HD6.
Technical details on video inputs, bandwidth, impedance, and frequency range.
Technical details on RCA and CAT5 zone video outputs and power.
Using the built-in test generator for troubleshooting zone video outputs.
Procedure for restoring the HD6 to its original factory configuration settings.
To Next Page
