B&Q CSS1354 User Manual

Before you Start …
Build the unit close to where it will be used. Handle all items carefully. Always lay panels
down on a flat smooth surface. Complete each stage before moving onto the next one.
Follow these guidelines and take your time.
If any parts are missing, please call the Helpline on 01769 575500 and our team will get
things sorted.
Cross Head Screwdriver
Drill
Level
2.5mm
Drill Bit
5mm
Drill Bit
1 x Fixed Shelf
3 x LH Drawer Side
3 x RH Drawer Side
3 x Drawer Back
3 x Drawer Base
1
2
3
4
5
Panels Hardware
ASSEMBLY GUIDE
Minimum Tools required
Hammer
12 x
C
3 x
E
Fitted
Bedroom
Range
6 x
G
4 x
H
Flat Head Screwdriver
Please use scissors to open the
bag of fittings and then empty
the contents into a bowl so
that they do not get lost!
6 x
O
4 x
P
Handles, Handle Screws, Drawers & Doors are
supplied independently and not covered by this guide.
12 x
D
PLEASE keep all fittings away from young children
Bradawl
Scissors
Tape Measure
Please build your Single
Wardrobe before following
this guide
12 x
X
1 x
Z
1
2
3
4
5
2
3
4
5
2
3
4
5
COMBI PACK
WARDROBE
SINGLE
Soft Close
12 x
C
18 x
D
12mm
3 x
AP
3 x
AR
6 x
AS
10mm
3 x
3 x
3 x
3 x
AE
AF
AG
AH

B&Q CSS1354 Specifications

General

Brand	B&Q
Model	CSS1354
Category	Indoor Furnishing
Language	English

Summary

Assembly Guide

Panels Overview

Lists the different panels required for building the single wardrobe.

Hardware and Tools

Details the necessary hardware components and minimum tools for assembly.

Pre-Assembly Advice

Provides essential tips before starting assembly, including handling and preparation.

Wardrobe Assembly Steps

Fitting of Drawer Runners

Attach drawer runners to side panels and fit soft close mechanisms using screws.

Fitting of Fixed Shelf

Install the fixed shelf by lowering it onto cam legs and securing it into place.

Fitting of Door Stops

Attach the door stops to the unit as illustrated in the diagram.

Construction of Drawers

Drill holes for handles, attach drawer sides and back, then fit the drawer base.

Fitting Draw Runners to Drawers

Position and secure drawer runners to the drawer bottom using a bradawl and screws.

Fitting of Soft Close Bracket

Attach soft close brackets to both drawer sides using screws.

Fitting of Drawers to Unit

Insert assembled drawers into the unit by aligning wheels and pushing into position.

Door Hinges Installation

Fit hinges to doors, adjust doors for level and alignment, and attach hinge covers.