Banner Sure Cross DX80 Series User Manual

Sure Cross
®
Performance DX80 Wireless
I/O Networks
Instruction Manual
Original Instructions
132607 Rev. O
13 March 2019
©
Banner Engineering Corp. All rights reserved
132607

Banner Sure Cross DX80 Series Specifications

General

Housing Material	Polycarbonate
Communication Protocols	EtherNet/IP
Operating Temperature	-40°C
Mounting	DIN rail
Antenna Connection	RP-SMA
Configuration	Web-based interface
Data Interface	Ethernet

Summary

1 The Sure Cross® Performance Wireless Network

1.1 Sure Cross® Performance Gateways and Nodes

Defines Gateways and Nodes as core components of the wireless network, ensuring reliable data transfer.

1.3 DX83 Ethernet Bridge Overview

1.6 Sure Cross® User Configuration Software

2 Features

2.1 DX80 Gateway and Node Components

Details the physical components and features of DX80 Gateways and Nodes, including ports and displays.

2.5 Wiring Diagrams

2.5.1 Apply Power to the Gateway or Node

Illustrates wiring for powering Gateways and Nodes via M12 connectors, ensuring proper electrical connections.

2.6 Dimensions

2.6.1 Gateways and Nodes

Provides dimensional drawings and specifications for DX80 Gateways and Nodes.

3 Setting Up Your Wireless Network

3.1 Mixing Performance and Non-Performance (150 mW) Radios in the Same Network

Guides on mixing different power radios in the same network, ensuring compliance and optimal performance.

3.3 Bind Radios to Form Networks

3.6 Conducting a Site Survey (Gateway and Nodes)

3.6.4 Interpreting the Site Survey Results

4 Installing Your Sure Cross® Radios

4.1 Mounting SureCross Devices Outdoors

Provides recommendations for mounting SureCross devices outdoors to protect them from environmental factors.

4.3 Installation Quick Tips

4.3.1 Create a Clear Communication Path

Advises on selecting locations for clear wireless communication paths, minimizing obstructions.

4.4 Installing a Basic Remote Antenna

4.4.1 Weatherproof Remote Antenna Installations

Details sealing connections with splicing and electrical tape to prevent water damage.

4.4.4 Use an N-Type, Pole-Mounted Antenna

5 Advanced Setup Options

5.1 DX80 Menu Structure

Outlines the menu structure and navigation for DX80 Gateways and Nodes for advanced configuration.

5.1 DX80 Node Set-up Menu

5.1.1 RUN Menu

5.1.2 DINFO (Device Information) Menu

5.1.3 FCTRY (Factory) Menu

5.1.4 SITE (Site Survey) Menu

5.1.5 DVCFG (Device Configuration) Menu

5.1.6 DERR (Device Error) Menu

5.2 Web-based Configuration for the GatewayPro on DX83

5.2.1 Accessing the Web-based Configuration Screens

Guides on accessing web configuration screens via browser, including login and IP address settings.

5.3 Binding Mode: What does it do?

5.3.1 Automatic Binding Using the Menu Navigation

Guides on performing automatic binding using menu navigation for network setup.

5.3.2 Bind Radios Using Modbus Commands

5.4 Setting the Network ID in Extended Addressing Mode

5.6 Manually Assign a Binding Code to a Node

5.7 Setting the Maximum System Devices

5.9 Modbus Holding Registers

Lists Modbus holding registers and their mapping for accessing device data.

5.10 Modbus Communication Parameters

5.10.1 Set the Slave ID on a DX80 Gateway

Guides on setting the Slave ID for DX80 Gateways for Modbus RTU communication.

5.11 Default Output Conditions

5.11.2 Gateway Link Failure

Explains Gateway Link Failure parameters and how the system behaves during a link failure.

5.12 Defining the Units

6 Product Support and Maintenance

6.2 Troubleshooting

Provides troubleshooting tips for common issues, including startup problems and LED codes.

6.2.2 LED Message Codes

6.2.3 LCD Message Codes

6.2.5 Radio Link Time-Out and Recovery (Non-Host Connected Systems)

6.3 Maintenance

6.3.1 Replacing the Main Body Gasket

Guides on checking and replacing the main body gasket to ensure enclosure integrity.

6.3.3 Battery Replacement

6.4 Sure Cross® Radio Certifications

6.4.1 FCC Certification, 900 MHz, 1 Watt Radios

Details FCC certification requirements and compliance for 900 MHz, 1 Watt radios.

6.4.2 FCC Certification, 2.4GHz

6.5 Glossary of Wireless Terminology

6.6 Contact Us

6.7 Warnings

6.8 Banner Engineering Corp. Limited Warranty

Outlines the limited warranty for Banner Engineering products, including terms and exclusions.