Need help?Do you have a question about the Banner AMG and is the answer not in the manual?
General| Serial | RS-232/485 |
|---|---|
| Processor | ARM Cortex-A8 |
| Operating System | Linux |
| Certifications | CE, FCC, UL |
| Protocols | Modbus RTU, Modbus TCP |
| Ethernet | 10/100 Mbps |
| Configuration | Web-based configuration |
| Connectivity | Ethernet, Serial |
| Ports | 1 x Ethernet, 1 x Serial |
| Power Supply | 9-30 VDC |
Details the physical components and measurements of the Asset Monitoring Gateway.
Covers connecting the AMG, its home screen, and assigning sensors/converters.
Details how to view and manage a list of commissioned sensors and converters.
Provides access to sensor-specific configurations and algorithm settings.
Explains how to activate and configure the VIBE-IQ machine learning algorithm for vibration sensors.
Introduces screens for DXM details, configuration, and status.
Details cloud push status and configures Ethernet network settings.
Accesses HMI reset options and security/password settings.
Displays communication messages, critical errors, and sensor scan data.
Explains how the Asset Monitoring Gateway pushes data to the Banner Cloud Data Services website.
Guides users on creating a new gateway entry in the Banner Cloud Data Services portal.
Details the steps to enable and configure cloud data pushing from the HMI.
Provides technical specifications, operating conditions, and certifications for the AMG.
Details FCC and Industry Canada compliance information for the device.
Outlines the warranty terms and conditions for Banner Engineering Corp. products.
To Next Page
