Banner SureCross DX80 Series - Gateway with Multiple Nodes (DX80)

6.1.2 Gateway with Multiple Nodes (DX80)
In this configuration, the Gateway is the master of the wireless network.
Configure this network using the User Configuration Tool (UCT) and RS-485 to USB adapter cable. The UCT is used to map
inputs and outputs between Nodes and Gateways.
1
2
2
2
Item
Model No. Description
1 DX80G... DX80 or DX80 Performance Gateway
2 DX80N... DX80 or DX80 Performance Node
81398 User Configuration Tool (free to download from the Wireless Products section of Ban-
ner Engineering's website)
BWA-HW-006 RS-485 to USB adapter cable (not shown)
SureCross DX80 and Performance DX80 Product Manual
56 www.bannerengineering.com - tel: 763-544-3164 Rev. J