11.4.2 Replacement Filters
Model Number Description
FTH-FIL-001 Aluminum grill filter cap (factory default, ships with M12FT*Q sensors)
FTH-FIL-002 Stainless steel, sintered to 10 micrometer porosity (for high dust environ-
ments.)
11.5 Surge Suppressors
Part No.
Model No. Description
79296 BWC-LMRSFRPB Surge Suppressor, bulkhead, RP-SMA Type
12477 BWC-LFNBMN-DC Surge Suppressor, bulkhead, N-Type, dc Blocking
11.6 Cables
11.6.1 Antenna Cables
Use these cables to connect a Gateway or Node to a bulkhead surge suppressor or a bulkhead surge sup-
pressor to an RP-SMA antenna. These cables are typically used inside an enclosure or without an enclosure.
Part No. Model No. Description
78544 BWC-1MRSFRSB0.2 RG58, RP-SMA to RP-SMAF Bulkhead, 0.2M
78337 BWC-1MRSFRSB1 RG58, RP-SMA to RP-SMAF Bulkhead, 1M
78338 BWC-1MRSFRSB2 RG58, RP-SMA to RP-SMAF Bulkhead, 2M
77488 BWC-1MRSFRSB4 RG58, RP-SMA to RP-SMAF Bulkhead, 4M
Use these cables to connect a Gateway and Node to an N-type antenna, N-type antenna extension cable, or
N-type surge suppressor. These cables may be used inside or outside the enclosure or without an enclosure.
Part No. Model No. Description
77486 BWC-1MRSMN05 LMR100 RP-SMA to N Male, 0.5M
77820 BWC-1MRSMN2 LMR100 RP-SMA to N Male, 2M
SureCross DX80 and Performance DX80 Product Manual
Rev. J www.bannerengineering.com - tel: 763-544-3164 91
To Next Page
Loading...
