Banner TL50 Pro Series - Full Preview Connection Guide; Electrical Wiring Diagrams

Full Preview Connection (Recommended)
The full preview connection must be used for the TL50 Pro Tower Light, the K90 Pro Indicator, and for Pro-series Strip Lights, and is
optional but recommended for other Pro-series enabled devices.
A
B
C
E
D
F
A = Pro Converter Cable (MQDC-506-USB)
B = Splitter (CSB-M1251FM1251M)
C = PC running Pro Editor software
D = Any Banner Pro Series-enabled device (K50 shown)
E = Power Supply (PSW-24-1 or PSD-24-4)
F = 8-Pin to 5-Pin Double-Ended Cordset (MQDC-801-5M-PRO),
required for 8-Pin models
Default Segment Colors
Number of Segments
Colors (Bottom to Top)
1 Red
2 Green, Red
3 Green, Yellow, Red
4 Blue, Green, Yellow, Red
5 White, Blue, Green, Yellow, Red
6 Orange, White, Blue, Green, Yellow, Red
7 Magenta, Orange, White, Blue, Green, Yellow, Red
Wiring Diagrams
Note:
All models are bimodal and can be wired as PNP or NPN devices.
5-pin/Wire Models
3
4
1
2
5
10–30 V dc
or
S4/A
S2
S3
S1
Audible
S1 = Segment 1
S2 = Segment 2
S3 = Segment 3
S4 = Segment 4
A = Audible
1
4
5
3
2
Pin Color Segment Mode Advanced Mode
3 blue Common Common (PNP) or 10–30 V DC (NPN)
4 black Segment 1 Reset Input
1 brown Segment 2 10–30 V DC (PNP) or Common (NPN)
2 white Segment 3 PWM, PFM, Counter, or Timer input
5 gray Segment 4/Audible N/A
TL50 Pro Tower Light
2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 209142 Rev. D