EasyManua.ls Logo

Baofeng G11S - Beep tone (BEEP) - MENU 05; VOX (VOX) - MENU 06

Baofeng G11S
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Note: ON-backlight will be always on; OFF-backlight will be always off; KEY-touch key will automatically activate the
backlight. Without any key operation, the backlight will be automatically turned off after a delay of 5 seconds.
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.
6.3.5 Beep tone (BEEP) - MENU 05
If you enable this function, every time a key is pressed, you will hear a Beep tone. You can set it as follows:
1> Press [MENU] key to enter the main menu, and press the [+UP]/[-DOWN] key to enter the MENU 05.
2> Press [MENU] key again to enter the BEEP menu;
3> Press [+UP]/[-DOWN] key to select the BEEP switch, and the selection range is ON/OFF;
Note: ON-turn on the key prompt sound; OFF-turn off the key prompt sound.
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.
6.3.6 VOX (VOX) - MENU 06
Your radio has 5 VOX level settings: (OFF/1~5).
This function allows hands-free conversations: just speak in the direction of the microphone and the communication will be
automatically activated.
The steps for setting up VOX voice control transmission are as follows:
1> Press [MENU] key to enter the main menu, and press the [+UP]/[-DOWN] key to enter the MENU 06.
2> Press [MENU] key again to enter the VOX menu;
3> Press [+UP]/[-DOWN] key to select the VOX switch and sensitivity, the selection range is OFF, 1~5;
Note: Level 5 low sensitivity, use under high background noise; Level 1 high sensitivity, use under low background noise.
Select ‘OFF’ will turn off the VOX function. After the VOX function is turned on, the screen will display the ’VOX‘icon.
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.

Related product manuals