Installation of Accessories
I. External Speaker/Microphone Jack
Each radio can be used with an optional external speaker/microphone or headset, freeing your hands for other tasks. To use
an optional speaker / microphone or headset:
(1) Open the rubber cap on the side of the radio.
(2) Insert the plug(s) into the SPK/MlCjacks.
(3) Place the ear bud into your ear, and adjust the Microphone into your desired position.
2. Using a Headset
You can use a headset (#480 5R) for more private communications. To use a headset, lift the rubber cover from over the
headset jack, and then plug in the headset.
Important: Your radio is not submersible or waterproof when using a headset jack. When you remove the headset, be sure
to fully press the jack cover into place to restore its waterproof capability.
Charging the Battery
1. Charging the Radio
Two radios can be charged directly by using the supplied charging cradle. A single radio can charge using the Mini USB port
to connect to a USB power source. For fastest charging, turn off the radio before charging.
Warning!
To avoid the risk of personal injury or property damage from fire or electrical shock, only use the accessories specifically
designated for this product. Using the USB Port
(1) Connect the included AC adapter with USB connector cable to the radio's USB port. Connect the other end to an outlet
3
To Next Page
Loading...
