baracuda Ranger - MAINTENANCE AND CARE; Routine Maintenance and Storage

Step 7: Remove the Pool Pulse
™
from the hose end underwater and again
submerge the RANGER
™
head. When the bubbles have stopped
flowing from the head, reconnect the head to the female hose end.
MAINTENANCE AND CARE
1. Remove the RANGER
™
from the pool before super chlorinating or other
chemical balancing and re-install a minimum of four hours later.
2. Always disconnect the hose from the skimmer before backwashing your filter.
3. Off season storage: remove the disk and store it flat. Store the head in a warm
dry place.
4. Always store the hoses straight (in the original box if possible). Never coil the
hose. (Coiled hose may be straightened with hot water or by laying in the
sun on a warm deck for several hours).
10
CORRECT
INCORRECT
X