ASSEMBLY
RANGER
™
Head Unit
Slide the disc over the base of the footpad. Be sure it fits properly in the grooves provided.
PREPARE THE POOL AND FILTER SYSTEM
Step 1: Manually vacuum your pool.
Step 2: Backwash or clean your filter according to the manufacturer’s
instructions.
Step 3: Empty debris from the skimmer basket and the pump strainer basket.
Step 4: Divert the return flow directional fitting toward the bottom of
the pool.
(This prevents the pressure of the return water flow
from influencing the natural movement of the cleaner hose.)
Note: If your pool is equipped with a main drain, turn it off.
4
Slide the wheel deflector on to the female end of the hose that will attach to the cleaner
head.
Female End
Wheel Deflector
To Next Page
Loading...
