Baratza sette 270 - Care and Cleaning; Component Removal and Reinstallation

SETTE™ 270 MANUAL
v2.1 August 27, 2019
9
CARE AND CLEANING
REMOVING THE BEAN HOPPER
Rotate the bean shutoff knob to the CLOSED position, then press the START button to purge
any remaining beans. Remove the power plug from the power outlet. Remove the hopper
by rotating it counterclockwise until it stops, and then lift the bean hopper off of the grinder
housing.
REMOVING THE CONE BURR/GRIND ADJUSTMENT ASSEMBLY
1. The adjustable portalter hook must be swung to the side in order to remove the grind adjustment assembly
(g. C).
2. Rotate the bean shutoff knob so it is in the CLOSED position, then press the START button to run any
remaining beans through the grinder (g. D).
3. Once the grinder has been fully purged, rotate the grind adjustment assembly beyond the coarsest setting
to the install/remove indicator (blue triangle). The assembly will release downward for removal (g. E).
g. C g. D g. E