Baratza SETTE 30 Replacement Guide

www.baratza.com support@baratza.com rev. 9/12/2018
How To: Replace Adjustment Ring Interlock
Switch
Sette 30, 270, 270W, 270Wi
Time: 30 minutes
Difficulty: Medium
Tools/Supplies: T-10 Torx Bit,
Parts: S032
Additional Resources: Sette Case Removal
There are two techniques to changing this switch. Technique 1 is faster but carries slight risk of
damaging the front silver case (while bending the case down as shown in step 5) and is only
recommended for technicians who are comfortable running the risk of causing damage.
Technique 2 requires more disassembly and is longer, but is less likely to cause damage to the
silver case. Please read both techniques to see which one is best for your skill level.
Technique 1 (faster but more difficult)
*** Unplug the grinder from power supply ***
1. Remove the case
2. -WARNING- Although the capacitor will be discharged unless there are
extenuating circumstances, exercise caution as it potentially has a high voltage
charge that can shock you if the contacts are touched.

Baratza SETTE 30 Specifications

General

Product type	Burr grinder
Burr material	Stainless steel
Product color	Black, Silver
Country of origin	Taiwan
Coffee beans capacity	400 g
Number of grinder settings	30
Adjustable grinder settings	Yes
Display type	LED
Current	2.6 A
AC input voltage	100–120 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	240 mm
Width	130 mm
Height	400 mm
Weight	3200 g