Barco Coronis Fusion 10MP User Manual

Coronis Fusion 10MP 11
Display installation
Removing the covers
CONNECTOR COMPARTMENT COVER
The connector compartment cover should be removed to get access to
the connectors. To remove the cover, proceed as follows:
1 Gently lift the clips at one of the handles of the connector
compartment cover to release that side of the cover.
2 Do the same at the other side of the cover.
3 Remove the cover.
Prior to installing your CORONIS FUSION 10MP display and
connecting all necessary cables, make sure to have a suitable
display controller physically installed in your computer. If you are
using a Barco display controller, please consult the user guide
delivered with it to do this.

Barco Coronis Fusion 10MP Specifications

General

Brand	Barco
Model	Coronis Fusion 10MP
Category	Monitor
Language	English