Barco CR series User Guide

User’s Guide – Introduction
F35/FL35
user’s guide - Introduction
english
4
5.5.2 Attaching the ceiling cover
5.6 Connection and cables
5.6.1 Setting up a video source
5.6.2 Setting up a computer source
5.6.3 Connecting command and control interfaces
5.6.4 Attaching X-PORT™ modules
5.7 Using X-PORT™ modules
5.7.1 X-PORT DCC120
5.7.2 X-PORT 3G-SDI
5.7.3 X-PORT HDMI 3D
5.8 Image alignment
5.9 Setting image orientation
5.10 Using source scan
5.11 Limiting OSD messages
5.12 Changing the language of the menu system
5.13 Identifying system status
5.13.1 Getting information about the active source
5.14 Using the dual lamp system (UHP models only)
5.15 Configuring 3D (AS3D)
5.16 Image sizes
6 Advanced setup 35
6.1 Controlling multiple projectors with remote control ID (RCID)
6.2 Protecting the projector with a pin code
6.3 Using dual head input
6.4 Multi-channel 3D synchronization
6.4.1 Synchronous frame sequential
6.4.2 Asynchronous frame sequential
6.4.3 Synchronous side-by-side
6.4.4 Asynchronous side-by-side
6.5 Setting custom color space and digital level
6.6 Disabling IR receivers
6.7 Controlling screens with triggers
6.8 Setting aspect trigger behavior
6.9 Automatic power on/off
6.9.1 Using the timer
6.9.2 Using DPMS (Display Power Management Signaling)
6.10 Disabling LED indicators
6.11 Setting the background color
6.12 Selecting the startup logo
6.13 Setting OSD menu timeout
6.14 Selecting the startup logo

Barco CR series Specifications

General

Brand	Barco
Model	CR series
Category	Projector
Language	English