Need help?Do you have a question about the Barco DP4K-23B and is the answer not in the manual?
Provides general safety instructions and notices on optical radiation, including hazard distance warnings.
Details crucial safety instructions to prevent electrical shock and personal injury.
Outlines safety precautions for handling cooling liquid, cleansing agent, and TIM paste.
Explains hazard distance (HD) and restriction zones for high brightness projectors.
Describes hazard distance (HD) and restriction zones for fully enclosed projection systems.
Details environmental conditions, cooling requirements, and main power requirements for installation.
Offers an overview of the installation stages, serving as a checklist for setting up the projector.
Details guidelines and steps for positioning the projector at the port window.
Explains the mandatory installation of the exhaust system and its requirements.
Outlines the procedure and requirements for connecting the projector to the power net.
Details the procedure for connecting a UPS to the projector's electronics.
Lists supported xenon lamp types and their respective adapters.
Provides instructions for qualified service personnel to remove the lamp house.
Details the procedure for removing the xenon lamp by qualified service personnel.
Guides qualified service personnel through the installation of the xenon lamp.
Explains how to update lamp information parameters after lamp installation.
Describes the procedure for realigning the xenon lamp in its reflector for optimal performance.
Guides users on how to select the appropriate lens using the lens calculator.
Provides step-by-step instructions for installing a lens into the projector.
Details the procedure for safely removing a lens from the projector.
Provides a procedure for installing a HDD into the ICMP(-X) and re-initialization.
Details the procedure for removing a HDD from the ICMP(-X).
Details the procedure for switching on the projector, including pre-checks and steps.
Explains the correct procedure for switching off the projector, including cooling down.
Guides on adjusting the red DMD to align with the blue DMD for convergence.
Guides on adjusting the green DMD to align with the blue DMD for convergence.
To Next Page
General
