Need help?Do you have a question about the Barco DP4K-19B and is the answer not in the manual?
General| Resolution | 4096 x 2160 |
|---|---|
| Contrast Ratio | 2, 000:1 (native), 6, 000:1 (dynamic) |
| Projector type | Digital Cinema Projector |
| Projection Technology | DLP |
| Weight | 120 kg / 264.55 lbs |
| Dimensions | 721 x 548 x 844 mm (28.4 x 21.6 x 33.2 in) |
| 3D Technology | Active |
| Input Connectors | 3G-SDI |
Provides general safety information and warnings for projector operation.
Details critical safety instructions to prevent electrical shock and personal injury.
Explains hazard distance and precautions related to high brightness light beams.
Describes hazard distance for enclosed projection systems and audience safety.
Summarizes environmental conditions and cooling/power requirements for safe operation.
Guides on positioning the projector correctly relative to the port window.
Explains the mandatory installation procedure for the projector's exhaust system.
Provides instructions for connecting the projector to the main power supply.
Provides instructions for qualified service personnel to remove the lamp house.
Details the procedure for removing the xenon lamp safely.
Step-by-step guide for installing a xenon lamp into the lamp house.
Guides on updating lamp information after installation for optimal performance.
Provides step-by-step instructions for installing a lens into the projector.
Explains how to adjust lens shift, zoom, and focus for image optimization.
Guides on adjusting back focal length for optimal focus and image quality.
Describes the Scheimpflug adjustment for achieving sharp focus across the entire screen.
Explains the HDD configuration in RAID 5 and the implications of disk failure.
Step-by-step guide for installing a new HDD into the ICMP(-X).
Explains the meaning of HDD status LEDs and troubleshooting for errors.
Guides on how to obtain the ICMP(-X) certificate using a QR code or software.
Details the parameters available for configuring the ICMP(-X) using Communicator software.
Explains SDI terminology and various SDI signal standards and formats.
Details the HDMI 2.0 capabilities, supported formats, and cable requirements.
Step-by-step instructions for safely switching on the projector.
Procedure for safely switching off the projector, including cool-down.
Instructions for removing and cleaning the front dust filter.
Procedure for removing and cleaning the bottom dust filters.
Guides on how to clean the projector lens safely and precisely.
Procedure for refilling the cooling liquid by qualified service personnel.
Guides on adjusting the red DMD convergence relative to the blue DMD.
Explains how to adjust the green DMD convergence relative to the blue DMD.
To Next Page
