Need help?Do you have a question about the Barco DP K-32B Series and is the answer not in the manual?
Critical instructions to prevent electrical shock, fire, and personal injury when operating the projector.
Specifies environmental conditions, cooling, and main power requirements for safe projector operation.
Guidance on positioning the projector at the port window, including required tools and centering.
Mandatory instructions for installing the exhaust system to ensure proper airflow and cooling.
Procedure for safely removing the lamp house from the projector.
Step-by-step guide for removing the xenon lamp from the XL Lamp House.
Instructions for installing a xenon lamp into the manual XL Lamp House.
Detailed steps for installing a lens into the projector lens holder.
Procedure for safely removing a lens from the projector lens holder.
Procedures for removing and installing HDDs in the ICMP.
Step-by-step instructions for installing the touch panel interface.
Procedure for safely switching on the DPxK-32B projector.
Procedure for safely switching off the DPxK-32B projector.
Procedures for removing the lamp, rear, input, front, and side covers.
Procedures for installing the front, input, lamp, rear, and side covers.
Instructions for removing and cleaning the front dust filter.
Instructions for removing and cleaning the bottom dust filters.
Identification and location of convergence adjustment knobs.
Procedures for adjusting red-on-blue and green-on-blue convergence.
To Next Page
General
