R5905754 /13 DPxK-32B 119
As a result the projector is safely prepared for the ICMP reboot. All ongoing events on the ICMP (e.g. ingest)
are stopped immediately and the ICMP restarts.
Image 7-13
WARNING: Resetting the ICMP with the hardware reset button may cause damage to the content
on the HDDs. A re-configuration of the whole system may be required!
7.14 Obtaining the Barco ICMP certificate
Required tools
Smartphone (with auto-focus) or control software (e.g. Communicator, Commander or WEB Commander)
Using the CertID label to download the ICMP certificate
1. Scan the QR code (reference 1) on the front face of the ICMP with a smartphone. It's recommended to use a
smartphone with auto-focus. The QR reader will automatically redirect to the ICMP certificate download page
on the web server.
Note: Instead of downloading the ICMP certificate you can use the CertID number (reference 2),
located below the QR code, in communication with your KDM supplier. Certified KDM suppliers can
use this CertID number to retrieve the ICMP certificate directly.
Image 7-14
Using control software to obtain the ICMP certificate
1. Use the WEB Commander to download the ICMP certificate from the ICMP main board. For detailed
instructions see user guide of the WEB Commander.
or
use the Commander to download the ICMP certificate from the ICMP main board. For detailed instructions
see user guide of the Commander.
or
ICMP
To Next Page
Loading...
Need help?
General
