EasyManuals Logo
Home>Barco>Projector>DP K-32B Series

Barco DP K-32B Series User Manual

Barco DP K-32B Series
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #150 background imageLoading...
Page #150 background image
R5905754 /13 DPxK-32B150
Clean the dust filter
1. Remove most contamination with a vacuum cleaner in an other room or outside.
2. Blow remaining dust away with compressed air in an other room or outside.
These dust filters are fragile. Clean them gently!
Mount the dust filters
1. Insert the dust filter with the handle upwards. Small filter at the back, big filter at the front.
2. Push the filters completely in until they click into position.
3. Reinstall the side cover.
11.3 Cleaning the lens
To minimize the possibility of damage to optical coatings, or scratches to lens surfaces follow the
cleaning procedure as described here precisely.
Required tools
Compressed air.
Clean Toraysee® cloth or any micro fiber lens cleaning cloth.
Clean cotton cloth.
Required parts
Lens cleaner (e.g. Carl Zeiss lens cleaner or Purasol® or any water-based lens cleaner)
How to clean the lens?
1. Blow off dust with clean compressed air (or pressurized air cans
5
) .
2. Clean with lens cleaner together with a clean lens cleaning cloth to remove the dust and contamination. Use
big wipes in one single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the
coating.
3. Use a dry lens cleaning cloth to remove left liquid or stripes. Polish with small circles.
4. If there are still fingerprints on the surface, wipe them off with lens cleaner together with a clean lens cleaning
cloth. Polish again with a dry one.
If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty
cloth.
11.4 Cleaning the exterior of the projector
How to clean the exterior of the projector ?
1. Switch off the projector and unplug the projector from the mains power net.
2. Clean the housing of the projector with a damp cloth. Stubborn stains may be removed with a cloth lightly
dampened with a mild detergent solution.
Maintenance
5: Pressurized air cans are not efficient if there is too much dust on the surface, the pressure is too low

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Barco DP K-32B Series and is the answer not in the manual?

Barco DP K-32B Series Specifications

General IconGeneral
BrandBarco
ModelDP K-32B Series
CategoryProjector
LanguageEnglish

Related product manuals