Available options:
• LCD Flicker Compensation
• Replaceable front filter
• Analog resistive touch screen
• Barco Interface Protocol
• Loop through (RGBS)
• 2nd RGB input
• Barco Maintenance keypad
• Custom power connectors
• Humiseal - PCB formal coating
Front bonding
Barco has developed unique bonding
capabilities to protect the LCD against
extreme environmental conditions
(temperature, shock, vibration,
humidity, EMI...) and to significantly
improve optical performance.
Automatic Phase Adjust (APA)
The APA function automatically locks
the LCD sampling clock to the
(drifting) graphics generator pixel
frequency, thus avoiding image
artifacts like pixel noise. Drift can be
caused by temperature changes,
electromagnetic interference and other
environmental factors.
LCD Flicker Compensation (patented)
When updating images with high contrast and high density (such as sonar or dense
tactical data) the LCD’s brightness varies with the rate of updating. This luminance
variation, referred to as ‘LCD Flicker’, can cause serious eye-fatigue and affect the
interpretation of the displayed data. Barco has integrated a unique set of algorithms
that reside in the hardware interface of the display (between the graphics generator
and the LCD). This feature compensates for LCD Flicker, without affecting the
displayed data, over all operating parameters.
Technologically advanced solutions
With APA Without APA
AR coating
Protective glass
EMI shield
LCD
NVIS filter (if required)
Coating filters
Diffuser
Backlight system
To Next Page
Loading...
Need help?
General