Bard W3RV2-R - Figure 5 Wall Mounting Instructions; Figure 6 Wall Mounting Instructions

Manual 2100-615A
Page 11 of 24
FIGURE 5
WALL MOUNTING INSTRUCTIONS
FIGURE 6
WALL MOUNTING INSTRUCTIONS
WOOD FRAME WALL INSTALLATION
BRACKET. MOUNT ON
INSTALLING UNIT.
OPENING
OPENING
SUPPLY AIR
DUCT
SUPPLY AIR
OPENING
RETURN AIR
CONCRETE BLOCK WALL INSTALLATION SIDE VIEW
OPENING
RETURN AIR
WALL BEFORE
OPENING
WOOD OR STEEL SIDING
RETURN AIR
BOTTOM MOUNTING
BEFORE INSTALLATION
WALL STRUCTURE
MOUNT ON UNIT
FACTORY SUPPLIED
RAIN FLASHING.
SUPPLY AIR
MIS-3080
I
A
C
K
E + 1.000
B
1.000
L
C
STRUCTURAL STEEL
2 x 6
SEE UNIT DIMENSIONS, FIGURE 2,
FOR ACTUAL DIMENSIONS.
SUPPLY DUCT
OPENING
MIS-3081
FRAMING MATERIAL
ALL AROUND DUCT
2 x 4'S, 2 x 6'S &/OR
OPENING
RETURN DUCT
INTERIOR FINISHED WALL
OVER FRAME
EXTERIOR FINISH WALL
OVER FRAME
ATTACH TO BOTTOM
PLATE OF WALL
1.000" CLEARANCE
ALL AROUND DUCT
ATTACH TO TOP
PLATE OF WALL
1.000" CLEARANCE
THIS STRUCTURAL MEMBER
LOCATED TO MATCH STUD
SPACING FOR REST OF WALL.
A SECOND MEMBER MAY BE
REQUIRED FOR SOME WALLS.
SEE FIGURES 3A & 3B – MOUNTING INSTRUCTIONS