Need help?Do you have a question about the Bard WH301 and is the answer not in the manual?
Overview of the specific type of heat pump being installed.
Lists organizations and contact details for industry standards and guides.
Explains the coding system for identifying heat pump models.
Covers damage checks, general installation, and ductwork requirements.
Details on supplied and optional filters and their installation.
Guidelines for proper installation and venting of the condensate drain.
Details on preparing and securing the unit to the wall.
Steps for physically securing the unit to the wall structure.
Instructions for units with a top outlet configuration.
Guidelines for sizing wire and circuit protection for main power.
Instructions for connecting thermostat and unit low voltage wiring.
Explanation of compressor cutoff and outdoor thermostat functions.
Diagrams and instructions for wiring compressor cutoff and outdoor thermostats.
Adjusting heat anticipator for stage 1 and stage 2 heat.
Explains indicator lamps, emergency heat, and malfunction lights.
Installer notes, crankcase heaters, and general service tips.
Describes how the unit operates in cooling and heating modes.
Information on system operating pressures and reference tables.
How temperature and time control the defrost cycle.
Steps to diagnose issues with the heat pump control system.
Procedure for checking the resistance of the outdoor temperature sensor.
Correct fan blade setting dimensions for proper air delivery.
Procedures for fan shroud removal and refrigerant charge guidelines.
To Next Page
General
