CT12A INSTRUCTION MANUAL
56-101-03100-E INTRO
May
/ 29 / 09 Page 3 of 19
D. The Certificate of Calibration: Each new unit and re-certified unit, together with its Verifi-
cation Bar, is delivered with a Certificate of Calibration that shows the date of the last
calibration and when the next calibration is due. It certifies the accuracy of the unit and
lists the part number and serial number to which it applies.
3. RECERTIFICATION
The Barfield CT12A Digital Cable Tensiometer and its Verification Bar have a one-year
recertification requirement. Qualified technicians in a shop equipped with the necessary
tooling and facilities must perform the maintenance required by this unit. As the
manufacturer, Barfield recommends a dead weight test and calibration facility setup.
4. APPLICABILITY
The Barfield CT12A Digital Cable Tensiometer part numbers applicable to this Instruction
Manual are:
102-03101
102-03102
102-03103
102-03104
102-03105
102-03106
102-03107
102-03108
102-03120
102-03102-BAC
102-03103-BAC
102-03105-BAC
To Next Page
Loading...