CT12A INSTRUCTION MANUAL
56-101-03100-E CH. 4
May
/ 29 / 09 Page 19 of 19
CHAPTER 4: RECEIVING, SHIPPING, AND STORAGE
1. RECEIVING
No special unpacking procedures are necessary. It is recommended that the factory shipping
container and packing materials be retained should it become necessary for any reason to
reship the CT12A.
Also recommended is that the CT12A be carefully inspected for damage. Check for any
binding of moving parts, improper mountings, broken parts and any other condition that may
affect operation. If damaged, do not use it and immediately notify the carrier and the
manufacturer.
2. SHIPPING
Use standard delicate electronic equipment packaging procedures when packing the battery
charger for reshipment.
3. STORAGE
Place a four-ounce bag of desiccant inside the CT12A case (optional).
Close and latch the cover.
Store in a cool, dry place with a temperature range of -20° C to +60° C.
To Previous Page
Loading...