EasyManua.ls Logo

Barko Hydraulics 595ML - Page 20

Barko Hydraulics 595ML
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
page 20
595 ML CRL (S)
800-00177
SERVICE SCHEDULE CONTINUED...
8 hours
Daily
SERVICE REQUIRED
50 hours
Weekly
100 hours
Monthly
400 hours
2 Months
1000 hrs
6 Months
Yearly
Battery - Clean and coat posts with grease. Check
electrolyte level and fill if necessary.
Engine Oil Filter - Replace.
Follow engine manufacturers guidelines.
Hydraulic Oil Cooler and Radiator - Clean.
Hydraulic Oil Reservoir Breather - Replace.
Accumulators - Check pressure and maintain at 1200
PSI.
Hydraulic Collector - Check mounting bolts.
Pump Drive - Replace fluid.
Hydraulic Oil Filters - Replace elements every 400
hours, after initial change at 100 hours on a new
machine.
Hydraulic Oil Reservoir - Change fluid.
Entire Loader - Steam clean, inspect for stress, wear,
cracks, damage, and loose parts.
Pilot Filters in Valve Banks - Remove, inspect and
clean.
Swing Motor Gearboxes - Change fluid.
NOTE: Use the intervals on Service Schedule when operating in normal conditions. Service the machine at shorter
intervals when operating in very hot, cold, dusty, or humid conditions.
Air Conditioner Air Intake Filter - Replace.
Hydraulic Oil Filter - On new machines the filter
element should be replaced first at 100hrs. and
then at 400 hrs. thereafter.

Table of Contents