EasyManua.ls Logo

Barko Hydraulics 595ML - Maintenance Service Schedule

Barko Hydraulics 595ML
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
page 19
595 ML CRL (S)
800-00177
8 hours
Daily
SERVICE REQUIRED
Fan and Drivebelts - Check for looseness and wear.
Tighten or replace as needed.
Operator's Platform - Clean area of debris, tools,
rags, water, ice, and snow.
Fuel Tank - Check level and fill if necessary.
Engine Crankcase Oil - Check level.
Engine Radiator - Check coolant level and fill if
necessary. Inspect exterior for dirt and debris and
clean if necessary.
Hoses, Connections, Cylinders - Inspect for leaks
and damage. Tighten, repair, or replace parts if
necessary.
Swing Motor Gearboxes - Check fluid levels.
Engine Air Cleaner - Inspect & replace element,if
needed.
Hydraulic Reservoir - check level and quality of oil.
Engine Shrouding - Clean and inspect.
SERVICE SCHEDULE
Fittings - Lubricate as shown on Lubrication Points.
Use a multi-purpose grease.
Bolts/Nuts - Visually inspect for wear or damage.
50 hours
Weekly
100 hours
Monthly
400 hours
2 Months
1000 hrs
6 Months
Yearly
Control Lever Linkage - Lubricate.
Bolts/Nuts - Check for proper torque every 100 hours.
Retorque if necessary.
Safety treads, safety signs, seat belt - Check for
damaged of missing items and replace.
Pump Drive - Check fluid level.

Table of Contents