Barnes thermoplay TH-M6 - Components Identification

4
6.15 “logs” environment ............................................................................................................................................ 52
6.16 “alarms” environment, recommended actions ........................................................................................ 53
6.16.1 Alarms and recommended actions .................................................................................................... 53
6.16.2 Historical alarms ........................................................................................................................................ 53
6.16.3 Active alarms .............................................................................................................................................. 55
6.16.4 Alarm configuration ................................................................................................................................ 56
6.16.5 Alarm shout down ................................................................................................................................... 57
6.16.6 Alarm acknowledgment ........................................................................................................................ 58
6.17 “export” environment........................................................................................................................................ 58
6.18 “hardware setting” environment ................................................................................................................... 60
7 Maintenance ................................................................................................................... 62
7.1 Power board replacement ............................................................................................................................... 62
7.2 Fuse replacement................................................................................................................................................ 63
8 Optional accessories ....................................................................................................... 63
8.1 Interconnection of two temperature controllers .................................................................................... 63
8.2 Digital INPUT - OUTPUT .................................................................................................................................... 63
9 Supervisory software update ........................................................................................ 65
10 Warranty ...................................................................................................................... 68
11 Disposal of A.E.E. ......................................................................................................... 68
Rev.
Date
SW. Ver.
New Features
1.0
May 2013
winlog 2.07.23
project 3.0.3
firmware 3.3
First issue
2.0
October
2014
winlog 2.07.40
project 3.07
firmware 3.3
Password added to access to Windows by closing TH-
M6, available only for Thermoplay user. In the start up
opti
ons the “Service” command has been added to
enter in Team Viewer. Options added to alarms (to
shut up, to acknowledge, to configure).
Note: The temperature controllers with software release preceding version 2.07.40 project
3.07 firmware 3.3, are not provided with the additional features included in revision 02.
In order to upgrade these controllers it is required to update the software and replace
the hardware. The new software rev.2.0 is compatible with previous hardware, but the
new features are not operative.
2 Components identification
TH-M6 24-48 zones control unit is normally supplied in the following configuration:
• main unit
• cable for connecting 2 controllers (optional), digital input-output cable (optional).
• electrical schemes
• special square key for doors opening
• User and maintenance manual
• CQ certificate