33
To tune your furnace using adaptive tuning:
1. Load your furnace with a load characteristic of
those you intend to heat in it.
2. Press the PAGE button until display reads, “Atun
LiSt.”
3. Press the SCROLL button until “drA OFF” is dis-
played.
4. Press the UP or DOWN button to select “on.”
5. Press the SCROLL button until “drA.t” is dis-
played.
6. Press the UP or DOWN button until the desired
trigger value is achieved.
8 SEGMENT P
ROGRAMMABLE MODEL W
/OTP
To Next Page
Loading...
