6 Configuration
ex
44 / 106
Subject to technical modifications
Revision A / 04/2019
6 Configuration
6.1 Programming tools
Zebra offers a range of different tools for the programming and simple connection of the hand-held
scanners.
All tools are available to download from Zebra at the following address:
https://www.zebra.com/us/en/support-downloads/scanners/ultra-rugged-scanners/ds3608-hp-ds3678-
hp.html
Area:
6.1.1 Programming manuals
Various programming manuals for simple programming are available from Zebra. The scanner can be
set up with the help of the programming barcodes.
‒ DS36X8 Product Reference Guide
‒ Advanced Data Formatting Programmer Guide
‒ Multicode Data Formatting and Preferred Symbol User Guide
6.1.2 Zebra 123Scan Utility
BARTEC recommends using the Zebra 123Scan Utility for programming with the aid of a PC.
Zebra 123Scan Utility offers the following advantages:
‒ Simple and fast configuration of hand-held scanners
‒ Creation of profiles and saving the configurations on the PC
‒ Duplication of configurations on further hand-held scanners
‒ Firmware updates
‒ Other
The Zebra 123 Scan Tool only supports USB connection.
To use the Ex-certified hand-held scanners, plug-ins are required so that the 123Scan Utility recognizes
the connected scanners and a software update or configuration is possible.
The plugins are already implemented in the currently available versions.
When using older, not updated 123 Scan Tool applications, the plugin must be installed manually.
To Next Page
Loading...
Need help?
General
