Bartec BCS36 8ex Series - Page 7

BCS36x8
ex
Series Connection example
Type 17-A1S4-*HP* and B7-A2S4-****
Subject to technical changes.
05/2020
Page 7 of 78
The Zebra 123 Scan Utility support only USB connection to the scanner.
The Utility is running on Windows operating system.
Programming / setting via the Zebra 123 Scan Utility is not supported via the Universal Power
Supply Module (UVM).
A programming cable is required.
Further notes on programming can be found in the:
 BARTEC user manual.
 Original Zebra documentation. The explosion-proof BARTEC hand scanners are
functionally based on the following Zebra hand scanners:
- BCS3608ex-IS is based on Zebra DS3608-HP
- BCS3678ex-IS is based on Zebra DS3678-HP
- BCS3608ex-NI based on Zebra DS3608-HP or DS3608-ER
- BCS3678ex-NI based on Zebra DS3678-HP or DS3678-ER