Bartec TECH400 - TPM and Vehicle Selection; Select by TPM Type; Select by Vehicle

Tech 400 User Guide R5 4/1/08
16
Tech 400 User Guide R5 4/1/08
13
All the TPM data is available for examination or printing from a pc
via the USB port. See the PC connection section of this document
on page
23.
This is an information line stating the current operation
mode – by TPM type or vehicle model. Pressing ‘Enter’ will
commence a test of this TPM / vehicle.
6. Selec
t by TPM Type
This Item is a sub menu, pressing the Enter Key will take the
us
er to the “Select by TPM” menu. Select the required TPM.
Select by Vehicle
When this is selected, the next screen prompts for selection by
mak
e, model, then year.
If a vehicle has more than 1 TPM type in a year- the TPM type has
a
lso to be selected.
(A vehicle model position ‘TRW Enable’ prompts for any TPM’s that
require ena
bling prior to installation- e.g. TRW’s on Hondas)
The selected vehicle is remembered by the tool when a test is
commenced.
Select By Make
Select by Model