Baseline BaseStation 1000 User Manual

Upper Threshold Moisture Sensor-Based Watering
4. Press the

button to highlight the Day & Time Start option, and then press the OK button. A
checkmark displays next to the Day & Time Start option.
5. Press the

button to go to the Day & Time Start menu.
6. Press the

button to highlight the Set Start Days
option, and then press the OK button. The Set Start
Days screen displays.
7. Press the

button to highlight one of the following
options, and then press the OK button:
 Weekday – After you select the Weekday option,
press the

button to set up the weekdays when
you want the program to start. By default, the boxes for the days of the week are marked with a
checkmark, which indicates that the program will start every day. If you want to change a start
day setting, press the

button to select the day, and then press the OK button to change the
setting.
 Even – Select Even to start the program only on the even numbered days of the month.
 Odd Skip 31
st
– Select Odd Skip 31
st
to start the program only on the odd numbered days of the
month, but skip the 31
st
day in order to maintain an every-two-day schedule when crossing to a
new month.
 Odd – Select Odd to start the program only on the Odd numbered days of the month.
 Interval – After you select the Interval option, press the

button to set up a custom day
interval. Press the + or – button to change the number in the Day Interval field.
 Smart Interval – After you select the Smart Interval option, press the

button to set up the
intervals for each half month. The calendar displays boxes that represent the months of the
year. The numbers in the boxes represent the day intervals for first half and second half of the
month. Press the

button to move to the box where you want to change the interval, and then
press the + or – button to change the number in the box.
Note: The Smart Interval based watering schedule works best in regions where landscapes are
irrigated all year. Baseline recommends that you use the historical ET deficit data for your region
to configure the intervals. To find the historical ET deficit data for your region, consult with your
local Agricultural Cooperative Extension office – you can find a national register of the extension
offices at: http://www.csrees.usda.gov/Extension/
8. Press the BACK button to return to the Day & Time Start menu.
9. Press the

button to highlight the Set Start Times option, and then press the OK button. The Set
Start Times screen displays.
Note: Each active program must have at least one start time. Programs that have no start times will
not run.
10. Press the

button to highlight the box for the start time that you want to change.
11. Press the + or – button to change the number in the box.
Note: To rapidly increase or decrease the number, press and hold the + button or the – button.
Baseline Support: 866-294-5847 5 www.baselinesystems.com

Baseline BaseStation 1000 Specifications

General

Brand	Baseline
Model	BaseStation 1000
Category	Controller
Language	English