5
8. Precautions
1. The charging contact surface on the back of your mobile phone shall be free of
metallic substance such as iron sheet, rings, metallic protective covers and so on.
2. During charging of your mobile phone, in case of any discontinuous charging or
severe heat discovered, which may be resulted from misalignment between your
mobile phone receiving coil and the wireless charging coil, or presence of metallic
matter inside the phone protective cover, please try to cool your mobile phone
down and remove the protective cover before aligning it again correctly.
3. This product has over-current protection function. Use of improper products may
cause its output power to be cut off or reduced and the charging speed to be
lower in order to ensure the safety. Please check your device for any improper
use.
4. Use of this product in an indoor environment with temperature higher than 40 °C
is prohibited. The recommended optimal working environment is with
temperature of 25 °C.
5. Please don’t place this product in an environment with too high temperature
(over 45 °C) or with too low temperature (less than -20 °C). Please don’t give this
to any child as a toy. Please keep it out of children’s reach.
6. Use dry soft cloth to clean its surface and never use any chemical, soap or
detergent to wash it.
7. Don’t try to disassemble this product by yourself. Improper use or incorrect
placement of this product may result in shorter service life. Any damage done to
this product may void the warranty.
Shenzhen Times Innovation Technology Co., Ltd.
Address: Room 03, 6/F, Building 3, WINLEAD,
Fada Road, Bantian Street, Longgang District,
Shenzhen, China
TEL: +86 755-82433603
Alza.cz a.s.
Jankovcova 1522/53, Holešovice
170 00 Praha 7
www.alza.cz
+420 225 340 111 CZ
To Next Page
Loading...
