2. Installation
Reasonable installation is critical factor of the instrument’s normal working.
Installation must be carried out by trained person in accordance with the manual.
2.1 Installation considerations
2.1.1 hints for the host mounting
The host should not be mounted in a confined space where temperatures
may exceed the normal working temperature (-40~+70), if the host is
mounted outside, it must be protected from direct sunlight or severe
weather conditions.
Ensure that the mounting surface is not subject to vibration and is not in
close proximity to high voltage cables, contactors or drive controls.
Select appropriate knockouts in the base of the enclosure and fit
appropriate cable glands to maintain the IP67 rating.
Do not use excessive force when tightening the fixing and avoid any
distortion of the enclosure.
Pay attentions to the dimensions of the host and the enclosure.
To Next Page
Loading...